ZX8000 Tent/Banner Welding Machine
Applications:
It can be applicable for welding PVC-P、PE、TPO、ECB、CSPE、EPDM、PVDF and other Coated fabric covering, foil and homogeneous or coating sealing film and PE coating fabric.
Technical Parameters:
| Model | ZX8000 | |
| Voltage | 220 | V |
| Frequency | 50 | Hz |
| power | 4200 | W |
| Temperature | 50～620 | ℃ |
| Welding speed | 1～10 | m/min |
| Welding width | 40 | mm |
| Size( L*W*H) | 531*337*300 | mm |
| Weight | 20 | kg |
Notice:
1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).
The drop cable / wire with protective earthed conductors can only be used.
5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
7. Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.
