ZX61B Extrusion Welder

Specifications:

1) Voltage: 220V
2) Power: extrusion system drive motor: 1020W
heating systems: heating tube 1020W + hot air welding torch 3400W
3) Temperature: adjustable air temperature 20 to 600 ° C
adjustable plastic extrusion heating temperature is 0 ~ 450 ℃
4) Preheating air volume: 500L/min
5) Welding rod diameter size: Φ3.0mm ~ 4.0mm

Advantage:

• Absorbed the technology from similar products of Germany and Italy and adopted hot air machines. Due to large power, the extrusion volume could reach 3KG, Its performance is stable, the intergrated design is adopted for the pre-heating air and screw extruder.
• The welding quality is good and the mould design is smooth without any blockage.
• There is no dead corner and carbonization.
• The fan imported from Switzerland is installed to ensure large air output, adequate heat, and the base materials will have a higher temperature prior to adhesion in order to achieve good melting effect.
• The machine could be operated simply and light in weight, (only 4kg), which helps to weld the position that is difficult to reach.

Usage:

• welding PP/PE/PVC plates, vessels and chemical tanks,
• connecting pipelines, making pipe bends,
• connecting and sealing various plastic pipes,
• making and fixing plastic tanks, welding plastic sheets,
• making pipe fittings and bending products in different shapes.
• In particular, our products are fit for outdoor onsite operation.