High Quality Heat Guns - ZX5700 Hot Wedge Welding machine – Heatfounder

Short Description:

Product Detail

Product Tags

Feedback (2)

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Grinding Media Zirconia Ball , Agate Mortar And Pestle Set , Activated Alumina Ceramic Ball , To improved expand market, we sincerely invite ambitious individuals and providers to hitch as an agent.

High Quality Heat Guns - ZX5700 Hot Wedge Welding machine – Heatfounder Detail:

Specifications:

Type	ZX5700
Power(W)	3000W
Voltage(V)	220-230V
Rate（Hz）	50/60HZ
Welding speed(m/min)	0.5-4m/min
Heating temperature(℃)	20~600℃
Welding width	15mmx2,interior cavity 15mm
Condition	New
Warranty	1 Year
Color	Green
Packaging	Aluminum box
Package size	350x330x400mm
Usage	For welding PE PVC and other hot melt materials
Certificate	CE
Thickness of material	0.5mm-2.0mm
Overlap width	16cm
Seam strength	≥85% base material(tensile resistant in shear direction)

Applications:

It can be applicable for welding PE、PVC、HDPE、EVA、PP and other hot melt material.

Notice:

Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
The voltage rating stated on the welder must correspond to line/mains voltage (220V).

The drop cable / wire with protective earthed conductors can only be used.

To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.

Please contact us for explosive view of the welding machine.

Welding process:

Please lift the pressure handle (14) to separate the upper and down pressure roller (12), then plug the power and open the on power switch.
Setting the welding parameters according to the data of welding test.
Please wait the actual temperature value reaching the setting value.
Put the welder at the welding position and put the two prepared materials (one up and the other one down) into the machine.
Press the pressure handle (14) to make the upper and down pressure roller (12) in place. Then open the moving switch (31), the machine would start walking and welding automatically.
To observe the relative position of the welding seam and the edge of the welded membrane at any time. It must be promptly corrected if there is deviation.
When the welder walks into the end of material, the pressures handle needs to be lifted to separate the upper and down pressure roller in time.
After completion of the welding work, press the buttons (24) and (25) on the panel to make the hot air blower in a cold blowing condition in order to cool the nozzle.

Product detail pictures:

Related Product Guide:

We also supply merchandise sourcing and flight consolidation companies. We now have our very own manufacturing facility and sourcing business. We could present you with almost every kind of product relevant to our solution array for High Quality Heat Guns - ZX5700 Hot Wedge Welding machine – Heatfounder, The product will supply to all over the world, such as: Canada, Paris, moldova, All our products are exported to clients in the UK, Germany, France, Spain, the USA, Canada, Iran, Iraq, the Middle East and Africa. Our products are well welcomed by our customers for the high quality, competitive prices and the most favorable styles. We hope to establish business relationship with all customers and bring more beautifu colors for the life.

Automatic Welders