Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder

Short Description:

Product Detail

Product Tags

Feedback (2)

With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for Thermal Ceramic Fiber Blanket , Insulator Alumina Ceramic , Zirconia Toughened Alumina Balls , Welcome you to be a part of us alongside one another to create your company easier. We're normally your finest partner when you want to have your own organization.

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder Detail:

Specifications:

Type	ZX5700
Power(W)	3000W
Voltage(V)	220-230V
Rate（Hz）	50/60HZ
Welding speed(m/min)	0.5-4m/min
Heating temperature(℃)	20~600℃
Welding width	15mmx2,interior cavity 15mm
Condition	New
Warranty	1 Year
Color	Green
Packaging	Aluminum box
Package size	350x330x400mm
Usage	For welding PE PVC and other hot melt materials
Certificate	CE
Thickness of material	0.5mm-2.0mm
Overlap width	16cm
Seam strength	≥85% base material(tensile resistant in shear direction)

ZX5700

Applications:

It can be applicable for welding PE、PVC、HDPE、EVA、PP and other hot melt material.

Notice:

Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
The voltage rating stated on the welder must correspond to line/mains voltage (220V).

The drop cable / wire with protective earthed conductors can only be used.

To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.

Please contact us for explosive view of the welding machine.

Welding process:

Please lift the pressure handle (14) to separate the upper and down pressure roller (12), then plug the power and open the on power switch.
Setting the welding parameters according to the data of welding test.
Please wait the actual temperature value reaching the setting value.
Put the welder at the welding position and put the two prepared materials (one up and the other one down) into the machine.
Press the pressure handle (14) to make the upper and down pressure roller (12) in place. Then open the moving switch (31), the machine would start walking and welding automatically.
To observe the relative position of the welding seam and the edge of the welded membrane at any time. It must be promptly corrected if there is deviation.
When the welder walks into the end of material, the pressures handle needs to be lifted to separate the upper and down pressure roller in time.
After completion of the welding work, press the buttons (24) and (25) on the panel to make the hot air blower in a cold blowing condition in order to cool the nozzle.

Product detail pictures:

Related Product Guide:

We always follow the principle "Quality Very first, Prestige Supreme". We have been fully committed to delivering our customers with competitively priced high-quality products and solutions, prompt delivery and experienced services for Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder, The product will supply to all over the world, such as: Mumbai, Sao Paulo, Surabaya, Our products are exported worldwide. Our customers are always satisfied with our reliable quality, customer-oriented services and competitive prices. Our mission is "to continue to earn your loyalty by dedicating our efforts to the constant improvement of our items and services in order to ensure the satisfaction of our end-users, customers, employees, suppliers and the worldwide communities in which we cooperate".

Automatic Welders

Extrusion Welders

Heat Guns

Plastic Welding

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.