Good Quality Alumina Ceramic Bead - ZX3000 Air Heater – Heatfounder
Good Quality Alumina Ceramic Bead - ZX3000 Air Heater – Heatfounder Detail:
Specifications:
| Type | ZX3000 |
| Voltage(V) | 230V |
| Power(W) | 3300W |
| Rate(HZ) | 50/60HZ |
| Minimum air volume(L/min) | 300 L/min |
| Heating temperature(℃) | 20~650℃，continously |
| Condition | New |
| Warranty | 1 Year |
| Dimension(mm) | 225x70x58mm |
| Usage | Shrink, Thermo forming,welding,drying,cleaning,
Hot melt adhesive activation, Blow the burr |
| Weight（KG） | 1.2Kg |
| Certificate | CE FCC |
Characteristics:
1. Electronic control temperature, temperature from normal temperature to 650℃ which can be continuously adjusted.
2. Small volume, light weight, easy to install.
3. Matching with air supply equipment, it can be widely used in film shrink tunnel furnaces,hose seals the tail machine, all kinds of dryer, non-woven fabrics in EVA membrane bonders, “heating assembly” of mechanical assembly equipment or the environment.
Operation:
1. Connect tool to the mains.
2. The mains connection cable should have the corresponding cross section area of conductor and should be fitted by a specialist.
3. As required,push-fit appropriate nozzle or reflector.
4. Adjust the hot temperature via the potentiometer.
5. Make sure that the hot air can flow freely(fire hazard).
6. The HEATFOUNDER company, as well as the authorized sales and service centers, offer advice and an introduction to the areas
of application of hot air tools,free of charge.
7. After use, allow the tool to cool down by letting cold air flow through it(preventing warm air back pressure).
Product detail pictures:
Related Product Guide:
Well-run equipment, expert income workforce, and far better after-sales expert services; We are also a unified large family, anyone stick to the corporate value "unification, dedication, tolerance" for Good Quality Alumina Ceramic Bead - ZX3000 Air Heater – Heatfounder, The product will supply to all over the world, such as: New York, Atlanta, European, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Grace from Hanover - 2015.06.19 10:42
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Mario from Russia - 2016.08.15 12:36
